Dragino
LPS8(N) Indoor LoRaWAN Gateway
Note: This was tested with the following firmware version: lgw-5.4.1668567157
.
Configure Packet Forwarder
In the Dragino web-interface, you must configure the Packet Forwarder such
that it forwards to localhost
on port 1700
.
By default, the web-interface can be accessed by entering the following URL
in your browser: https://GATEWAY-IP-ADDRESS:8000
(replace GATEWAY-IP-ADDRESS
by the actual IP address of your gateway). The default credentials are
root
/ dragino
.
- In the LoRaWAN menu, click LoRaWAN -- Semtech UDP
- Configure the following settings:
- Service Provider: Custom / Private LoRaWAN
- Server Address: localhost
- Uplink Port: 1700
- Downlink Port: 1700
- Click Save & Apply
Install ChirpStack MQTT Forwarder
SSH login
First you must login into the gateway using SSH:
ssh -p 2222 root@GATEWAY-IP-ADDRESS
The default password is dragino.
Download IPK
Use the following commands to download the latest version of the
chirpstack-mqtt-forwarder
package:
cd /tmp
wget https://artifacts.chirpstack.io/downloads/chirpstack-mqtt-forwarder/vendor/dragino/mips_24kc/chirpstack-mqtt-forwarder_4.1.0-r1_mips_24kc.ipk
Install IPK
Use the opkg
package-manager to install the downloaded package. Example:
opkg install chirpstack-mqtt-forwarder_4.1.0-r1_mips_24kc.ipk
Note: In case of an upgrade, it is recommeded to first uninstall the
chirpstack-mqtt-forwarder
package using opkg remove ...
and then install the
new version using opkg install ...
. Configuration files will be maintained.
Configuration
To connect the ChirpStack MQTT Forwarder to your MQTT broker, you must update
the ChirpStack MQTT Forwarder configuration file. This file is located at:
/etc/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder.toml
.
(Re)start and stop commands
Use the following commands to (re)start and stop the ChirpStack MQTT Forwarder service:
# start
/etc/init.d/chirpstack-mqtt-forwarder start
# stop
/etc/init.d/chirpstack-mqtt-forwarder stop
# restart
/etc/init.d/chirpstack-mqtt-forwarder restart
LG308(N) LoRaWAN Gateway
Please see LPS8N Indoor LoRaWAN Gateway instructions.