Changelog

v4.5.2

Bugfixes

  • Fix GNSS device path for RAK7289v2 and RAK7267.
  • Include correct configuration for RAK7267.

v4.5.1

Bugfixes

  • Fix regression in ChirpStack MQTT Forwarder init script.

v4.5.0

Upgrade notes

Backup and restore (Full image)

Before upgrading, please make sure to create a backup. Please see System > Custom Commands.

Features

ChirpStack Gateway Mesh

This release adds the ChirpStack Gateway Mesh component to the ChirpStack Gateway OS images.

New targets

This release adds support for the following RAK gateways:

Updates

  • Update OpenWrt to v23.05.4.
  • Update ChirpStack to v4.9.0.
  • Update ChirpStack MQTT Forwarder to v4.3.1.
  • Update ChirpStack Concentratord to v4.4.2.
  • Update ChirpStack UDP Forwarder to v4.1.8.

v4.4.0

Upgrade notes

Backup and restore (Full image)

Before upgrading, please make sure to create a backup. Please see System > Custom Commands.

Enable services

This release adds an Enabled configuration flag to the ChirpStack Concentratord, ChirpStack MQTT Forwarder and ChirpStack UDP Forwarder in the configuration. After upgrading, you must enable the services you would like to use.

Updates

  • Update OpenWrt to v23.05.3.
  • Update ChirpStack to v4.8.1.
  • Update ChirpStack MQTT Forwarder to v4.3.0.
  • Update ChirpStack Concentratord to v4.4.1.

Bugfixes

  • Add -c flag to pg_restore command (PostgreSQL database backup restore).

v4.3.2

Bugfixes

  • Fix regression introduced by v4.3.1 causing the ChirpStack UDP Forwarder to not start (missing chirpstack-udp-forwarder.sh).

v4.3.1

Improvements

  • RPi: Add FTDI kernel module for USB -> Serial devices. (#105)
  • Refactor ChirpStack package scripts and configuration in preparation to support targets with multiple concentrator modules.

Bugfixes

  • Fix error in SX1301 init script. (#108)

v4.3.0

Upgrade notes

This release updates the PostgreSQL database version. If you would like to retain all data, You must create a PostgreSQL + Redis backup before upgrading. You must use the following commands (using SSH):

mkdir -p /srv/backup
chmod 777 /srv/backup
sudo -u postgres /usr/bin/pg_dump -h localhost -d chirpstack -F c -f /srv/backup/chirpstack.pg

service redis stop
cp /srv/redis/dump.rdb /srv/backup/chirpstack.redis
service redis start

After upgrading, you can use the Restore ChirpStack backup command to restore the backup. For future backups, you can use the Create ChirpStack Backup command (see features) after upgrading.

Features

PostgreSQL & Redis backup / restore

This adds Create ChirpStack backup and Restore ChirpStack backup commands under System > Custom Commands.

Other features

  • Add Wireguard VPN support.
  • Add experimental support for RAK7268v2 gateways (to be documented).

Updates

  • Update OpenWrt to v23.05.2.
  • Update ChirpStack to v4.6.0.
  • Update ChirpStack Concentratord to v4.3.5.
  • Update ChirpStack MQTT Forwarder to v4.1.3.
  • Update ChirpStack UDP Forwarder to v4.1.6.

v4.2.0

Features

This is a very exciting release, as this release migrates the ChirpStack Gateway OS from Yocto to OpenWrt. Thanks to LuCI and the UCI configuration system it is now possible to configure the provided ChirpStack components as well things like network configuration through a web-interface instead of a CLI. This release also splits the packages from the ChirpStack Gateway OS configuration such that these can be integrated in other OpenWrt based projects. Main features that this release brings:

Web-interface

There is no need to configure the ChipStack Gateway OS using a terminal. Powered by LuCI), the ChirpStack Gateway OS now provides an easy-to-use web-interface to configure ChirpStack components and system configuration.

Custom packages

Through the web-interface (and cli) it is possible to install additional software using the OpenWrt package repositories. This has been requested several times, but until now would require to compile a custom ChirpStack Gateway OS image which would take several hours to complete.

Updates

  • Update ChirpStack to v4.4.3.
  • Update ChirpStack Concentratord to v4.2.3.
  • Update ChirpStack UDP Forwarder to v4.1.2.
  • Update ChirpStack MQTT Forwarder to v4.1.0.
  • Update Node-RED to v3.0.2.

Upgrade notes

Unfortunately it is not possible to migrate from ChirpStack Gateway OS v4.1.1 to ChirpStack Gateway OS v4.2.0. You need to re-flash your SD-Card with the ChirpStack Gateway OS v4.2.0 image.

v4.1.1

New shields

  • Add support for Dragino PG1302 (EU868 + US915).

Updates

  • Update ChirpStack to v4.3.0.
  • Update ChirpStack Concentratord to v4.1.1.
  • Update ChirpStack UDP Forwarder to v4.1.1.

Bugfixes

  • Change band_ to _region_ after rename in Concentratord repo. (#97)

v4.1.0

Features

ChirpStack MQTT Forwarder

This release replaces the ChirpStack Gateway Bridge with the ChirpStack MQTT Forwarder. The following MQTT configuration values will be automatically migrated from the chirpstack-gateway-bridge.toml configuration file:

  • server
  • topic_prefix (detected based on event_topic_template)
  • username
  • password
  • ca_cert
  • tls_cert
  • tls_key

Updates

  • ChirpStack to v4.2.0.
  • ChirpStack Concentratord to v4.1.0.
  • ChirpStack UDP Forwarder to v4.1.0.

v4.0.2

Updates

  • ChirpStack to v4.1.1.
  • ChirpStack Gateway Bridge to v4.0.3.
  • Node-RED to v3.0.2.

Bugfixes

  • Fix NodeJS / Node-RED crashing with "Bus error" error message. (#95)

v4.0.1

Updates

  • ChirpStack to v4.0.3.
  • ChirpStack Concentratord to v4.0.1.
  • The Things Network lorawan-devices to latest version.

New shields

  • Waveshare SX1302 LoRaWAN Gateway HAT

Bugfixes

  • Add missing /etc/fw_env.config file (see upgrade note below).
  • Fix missing Wiregard binaries. (#93)

Update note

If upgrading from v4.0.0 using the software-update utility, you must run the following command first because of the missing /etc/fw_env.config file:

sudo echo "/boot/uboot.env 0x0000    0x4000" > /etc/fw_env.config

v4.0.0

Main changes

ChirpStack v4

This release replaces ChirpStack Network Server (v3) and ChirpStack Application Server (v3) with ChirpStack v4.0.0.

MQTT certificates

If using the full image, MQTT TLS certificates will be automatically generated on first boot and configured in ChirpStack. For consuming device events throug the MQTT integration, you can generate certificates in the web-interface under the application integrations.

Note: localhost connections (e.g. if using Node-RED) to the MQTT do not need TLS certificates for authentication and authorization.

gateway-config improvements

If using the full ChirpStack Gateway OS image, which includes the ChirpStack Network Server, the gateway-config script will automatically create the gateway in the ChirpStack database for you.

Region configuration

The full image contains update region configuration for the common regions. The desired region can be selected using the gateway-config configuration script.

New shields

Support for the following shields has been added:

  • RAK2247
  • RAK5147
  • Seeed WM1302

Yocto Kirkstone

ChirpStack Gateway OS has been updated to Yocto Kirkstone. This should fix boot problems on some Pi 4 revisions, as this release contains an updated bootloader.

Other updates

  • ChirpStack Concentratord to v4.0.0
  • ChirpStack Gateway Bridge to v4.0.0
  • Node-RED to v2.1.6

v3.6.0

Updates

Note: The ChirpStack Gateway Bridge version included is compatible with ChirpStack v4 which will soon be released.

v3.5.1

Updates

Improvements

  • Additional region configurations
    • IMST Lite
      • RU864
      • IN865
    • Pi Supply - LoRa Gateway HAT
      • AU915
    • RAK2245
      • IN865
      • RU864
    • RAK2246(G)
      • IN865
      • RU864

Bugfixes

  • Fix configuration for RisingHF RHF0M301 shield (GPIO7 issue). #72

v3.5.0

Features

Node-RED integration

This release includes Node-RED into the full image version, with the node-red-contrib-chirpstack package pre-installed. Please note that it must be enabled using the gateway-config configuration utility first.

Updates

Notes

As this release increases the size of the rootfs and data partitions, updating using a .swu image is not possible.

v3.4.0

Features

  • Add support for Semtech 2.4 GHz gateway module.
  • Add support for RAK2287 gateway module.

Updates

Improvements

  • Disable append only in Redis configuration.
  • Align US915 and AU915 config examples (https://github.com/brocaar/chirpstack-docs/issues/38).
  • Cleanup ChirpStack Gateway OS recipe structure.

Bugfixes

  • Fix disabling bluetooth on Raspberry Pi 3 (so that UART pins can be used for GNSS module).

v3.3.3

Features

Updates

Bugfixes

  • Fix bootfiles path in rpi-config. (#63)
  • Remove libubootenv. (#64)
  • Update u-boot CONFIG_SYS_BOOTM_LEN to 16M.

v3.3.2

Updates

v3.3.1

Updates

v3.3.0

This marks the first non-testing release of the ChirpStack Gateway OS!

Updates

v3.3.0-test.9

Updates

Improvements

  • gateway-config has been updated for the Pi Supply LoRa Gateway HAT.
  • New gateway-config option has been added to reload the Gateway ID.

v3.3.0-test.8

Bugfixes

  • Fix ChirpStack Application Server Makefile execution to include web-interface statics in binary.

v3.3.0-test.7

Updates

Features

  • Add gateway-config wizard for MQTT configuration.
  • Update to Yocto Dunfell + build Go apps from source. (#55)

Bugfixes

  • Fix AU915 selection bugs for RAK concentrators. (#56)

v3.3.0-test.6

Features

  • Support has been added for the Raspberry Pi 4.
  • Support has been added for the Raspberry Pi Zero W.
  • Support has been added for the RAK2246 and RAK2246G shields.
  • Class-B beacon configuration has been added to the band configuration.

Updates

Improvements

  • gateway-config shows ChirpStack Gateway OS version.
  • gateway-config shows Gateway ID.
  • Change ISM band names to their common name. (#47)
  • sx1301-reset script has been modified to leave the reset pin as output.

v3.3.0-test.5

Updates

Features

Wifi Access Point mode

On initial installation on a Raspberry Pi 3, the Raspberry Pi will start Wifi in Access Point mode, so that it is possible to connect directly to the Raspberry Pi over WIFI for configuration of the concentrator shield and to re-configure the WIFI.

Improvements

  • RAK2245 configuration has been improved (using defined Concentratord model name).
  • RAK832 configuration has been improved.
  • RAK2245 / RAK831 AS923 channel-plan has been added. (#43)

Bugfixes

  • Fix passing incorrect model flags in gateway-config for some gateways.

v3.3.0-test.4

When updating from a previous v3.3.0 version, it is recommended to re-run the gateway-config utility to update the concentrator configuration.

Updates

v3.3.0-test.3

Updates

v3.3.0-test.2

Updates

Supported hardware

  • Raspberry Pi 1 B+ support has been added (for IMST Lite Gateway)
  • IMST Lite Gateway has been added to gateway configuration script.

v3.3.0-test.1

This is a rewrite of the ChirpStack Gateway OS, you must re-flash your SD Card to update! Currently this version only targets the Raspberry Pi 3.

Features

  • Yocto has been updated to version 3.0.
  • Software updates are now handled by SWUpdate.
  • The Semtech UDP Packet Forwarder has been replaced by ChirpStack Concentratord.

Updates

Fixes

  • Redis database does not start on boot after power failure that corrupts append only file. (#32)

v3.2.0test1

General

  • Update ChirpStack Gateway Bridge to v3.5.0.
  • Update ChirpStack Network Server to v3.5.0.
  • Update ChirpStack Application Server to v3.6.1.

Features

Bugfixes

  • Fix boot issue due to storage device not yet initialized. (#9)
  • Fix ChirpStack Network Server enabled_uplink_channels configuration. (#26)

v3.1.0test1

This release renames LoRa Gateway OS to ChirpStack Gateway OS. See the Rename Announcement for more information.

v3.0.0test3

LORIX One

  • Fix Wiregard kernel module dependencies.

v3.0.0test2

General

  • Update LoRa App Server to v3.2.0.
  • Update LoRa Gateway Bridge to v3.1.0.
  • Update LoRa Server to v3.1.0.
  • Update Monit to 5.26.0 and set check interval to 10 seconds.
  • Add PersistentKeepalive = 25 to Wiregard example config.
  • Update openembedded layers to latest versions.

Raspberry Pi

  • Fix concentrator ordering.

v3.0.0test1

General

  • LoRa App Server v3.1.0.
  • LoRa Server v3.0.2.
  • LoRa Gateway Bridge v3.0.1.

Raspberry Pi

v2.0.0test4

General

  • Add Wiregard VPN client
  • Bump LoRa Server package versions

Raspberry Pi

  • Change SPI speed to 2MHz (required by RAK2245)
  • Add IMST iC980A configuration
  • Add RAK2245 configuration

LORIX One 512MB

  • Fix u-boot command

v2.0.0test3

LORIX One

  • Fix setting the MAC address from EEPROM.

v2.0.0test2

General

  • Implement Mender for (OTA) system updates.
  • Implement OverlayFS over read-only root filesystem.
  • Update LoRa Gateway Bridge to v2.6.2.
  • [lora-gateway-os-full] Update LoRa Server to v2.4.1.

Raspberry Pi

  • Add support for Sandbox Electronics LoRaGo PORT concentrator.
  • Implement all US915 and AU915 channel-blocks. (#2)
  • [lora-gateway-os-full] Automatic (re)configure LoRa Server on setting the concentrator channel-plan.

v2.0.0test1

  • Initial test release.