Skip to content

Changelog

v3.3.0-test.9

Updates

Improvements

  • gateway-config has been updated for the Pi Supply LoRa Gateway HAT.
  • New gateway-config option has been added to reload the Gateway ID.

v3.3.0-test.8

Bugfixes

  • Fix ChirpStack Application Server Makefile execution to include web-interface statics in binary.

v3.3.0-test.7

Updates

Features

  • Add gateway-config wizard for MQTT configuration.
  • Update to Yocto Dunfell + build Go apps from source. (#55)

Bugfixes

  • Fix AU915 selection bugs for RAK concentrators. (#56)

v3.3.0-test.6

Features

  • Support has been added for the Raspberry Pi 4.
  • Support has been added for the Raspberry Pi Zero W.
  • Support has been added for the RAK2246 and RAK2246G shields.
  • Class-B beacon configuration has been added to the band configuration.

Updates

Improvements

  • gateway-config shows ChirpStack Gateway OS version.
  • gateway-config shows Gateway ID.
  • Change ISM band names to their common name. (#47)
  • sx1301-reset script has been modified to leave the reset pin as output.

v3.3.0-test.5

Updates

Features

Wifi Access Point mode

On initial installation on a Raspberry Pi 3, the Raspberry Pi will start Wifi in Access Point mode, so that it is possible to connect directly to the Raspberry Pi over WIFI for configuration of the concentrator shield and to re-configure the WIFI.

Improvements

  • RAK2245 configuration has been improved (using defined Concentratord model name).
  • RAK832 configuration has been improved.
  • RAK2245 / RAK831 AS923 channel-plan has been added. (#43)

Bugfixes

  • Fix passing incorrect model flags in gateway-config for some gateways.

v3.3.0-test.4

When updating from a previous v3.3.0 version, it is recommended to re-run the gateway-config utility to update the concentrator configuration.

Updates

v3.3.0-test.3

Updates

v3.3.0-test.2

Updates

Supported hardware

  • Raspberry Pi 1 B+ support has been added (for IMST Lite Gateway)
  • IMST Lite Gateway has been added to gateway configuration script.

v3.3.0-test.1

This is a rewrite of the ChirpStack Gateway OS, you must re-flash your SD Card to update! Currently this version only targets the Raspberry Pi 3.

Features

  • Yocto has been updated to version 3.0.
  • Software updates are now handled by SWUpdate.
  • The Semtech UDP Packet Forwarder has been replaced by ChirpStack Concentratord.

Updates

Fixes

  • Redis database does not start on boot after power failure that corrupts append only file. (#32)

v3.2.0test1

General

  • Update ChirpStack Gateway Bridge to v3.5.0.
  • Update ChirpStack Network Server to v3.5.0.
  • Update ChirpStack Application Server to v3.6.1.

Features

Bugfixes

  • Fix boot issue due to storage device not yet initialized. (#9)
  • Fix ChirpStack Network Server enabled_uplink_channels configuration. (#26)

v3.1.0test1

This release renames LoRa Gateway OS to ChirpStack Gateway OS. See the Rename Announcement for more information.

v3.0.0test3

LORIX One

  • Fix Wiregard kernel module dependencies.

v3.0.0test2

General

  • Update LoRa App Server to v3.2.0.
  • Update LoRa Gateway Bridge to v3.1.0.
  • Update LoRa Server to v3.1.0.
  • Update Monit to 5.26.0 and set check interval to 10 seconds.
  • Add PersistentKeepalive = 25 to Wiregard example config.
  • Update openembedded layers to latest versions.

Raspberry Pi

  • Fix concentrator ordering.

v3.0.0test1

General

  • LoRa App Server v3.1.0.
  • LoRa Server v3.0.2.
  • LoRa Gateway Bridge v3.0.1.

Raspberry Pi

v2.0.0test4

General

  • Add Wiregard VPN client
  • Bump LoRa Server package versions

Raspberry Pi

  • Change SPI speed to 2MHz (required by RAK2245)
  • Add IMST iC980A configuration
  • Add RAK2245 configuration

LORIX One 512MB

  • Fix u-boot command

v2.0.0test3

LORIX One

  • Fix setting the MAC address from EEPROM.

v2.0.0test2

General

  • Implement Mender for (OTA) system updates.
  • Implement OverlayFS over read-only root filesystem.
  • Update LoRa Gateway Bridge to v2.6.2.
  • [lora-gateway-os-full] Update LoRa Server to v2.4.1.

Raspberry Pi

  • Add support for Sandbox Electronics LoRaGo PORT concentrator.
  • Implement all US915 and AU915 channel-blocks. (#2)
  • [lora-gateway-os-full] Automatic (re)configure LoRa Server on setting the concentrator channel-plan.

v2.0.0test1

  • Initial test release.