Dragino
Note: These are custom firmware images that are not supported by Dragino and might might void your warranty. Use at your own risk.
Downloads
Please use one of the download options below to download the latest (v4.9.0-test.1) ChirpStack Gateway OS image.
| Model | Factory image | Sysupgrade image |
|---|---|---|
| Dragino LPS8N | Download |
Installation
LPS8N
Important note: The LPS8N device has limited memory. When running the
ChirpStack Gateway OS image on the gateway, it might run out of memory
when flashing a new firmware. To avoid this, it is recommended to stop
all chirpstack-* services first. This can be done in the web-interface
under System > Startup, by clicking the Stop button for each
chirpstack- service.
LPS8N to Gateway OS
This replaces the Dragino LPS8N firmware of the gateway with the Chirpstack Gateway OS.
- First download the latest ChirpStack Gateway OS image for the Dragino LPS8N (see above table).
- In the Dragino LPS8N web-interface, nativate to System > Firmware Upgrade.
- Click the Browse button under Upload Firmware File, select the ChirpStack Gateway OS image and click Upload.
- Once the image has been uploaded, click Proceed (do not enable any of the Preserve Settings checkboxes!).
- Wait until the firmware is flashed, this will take some minutes.
Gateway OS to LPS8N
This replaces the ChirpStack Gateway OS with the Dragino LPS8N firmware.
- First download the latest firmware from https://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Release/.
- In the ChirpStack Gateway OS web-interface, navigate to System > Backup / Flash Firmware.
- Click the Flash image... button at the bottom of the page and select the Dragino image and click Upload.
- De-select the Keep settings and retain the current configuration option and Continue.
- You might see a Image metadata not present warning, in which case you need to enable the Force upgrade checkbox.
- Wait until the firmware is flashed, this will take some minutes.
- Continue with the Dragino LPS8N documentation.
First usage
After flashing the ChirpStack Gateway OS image, follow the Getting started documentation to setup your gateway.